National Instruments PXI-1000B 8-Slot 3-U PXI Chassis Loaded with Modules

Description

This is a Surplus Auction
See special considerations:
This auction is for surplus inventory.
These are excess units we have in inventory that we are looking to liquidate. See the description to the right for more details.
Auction Terms
California Sales Tax applies to CA residents
Personal or Company Check (will delay shipment until check clears)
Certified Funds (Sameday shipment)
PayPal ~ Online Payment Option
National Instruments PXI-1000B
8-Slot 3-U PXI Chassis with PXI-8196, PXI-6508, PXI-8433/4, PXI-6602, PXI-6233, and PXI-6509
8-Slot 3-U PXI Chassis with
Embedded Controller, Digital I/O, RS485/RS422 Isolated, Timing I/O, M Series Multifunction DOA, and Industrial Digital I/O
Serial No: V04X01104
Unit is sold as-is please see pictures.
PXI-8196 Embedded Controller
PXI-6508 Digital I/O
PXI-8433/4 RS485/RS422 Isolated
PXI-6602 Timing I/O
PXI-6233 M Series Multifunction DAO
PXI-6509 Industrial Digital I/O
*Return Policy*
All units sold will have
void seals attached
. Please verify your unit matches the description in the auction prior to opening units to attempt any repairs.
No returns
will be approved for buyers who have
broken the void seals
. A picture of intact void seals will be required.
Manufacturer Description:
The National Instruments PXI-8196 RT embedded controller offers a high-performance platform ideal for real-time test and control applications. You develop your LabVIEW application with the LabVIEW Real-Time Module on Windows and then download the program to your NI PXI-8196 RT controller via Ethernet. The embedded code executes on a real-time OS. Thus, you use all of the powerful and flexible development tools of LabVIEW to build reliable, real-time solutions.
Features:
• Processor: 2.0 GHz Pentium M 760
• Memory: 512 MB - 2 GB*
• Hard Drive Size: 40 - 160 GB*
• ExpressCard/34 Slot
PXI-6508 96-Channel, 5 V TTL/CMOS, 2.5 mA PXI Digital I/O Module
uses four, 24‑bit programmable peripheral interfaces (PPIs) that can each be divided into three, 8‑bit ports. The PXI‑6508 can interface to peripherals or other computers, and it can operate in either a unidirectional or bidirectional mode and handshake with peripheral equipment. The PXI‑6508 is well suited for applications that require onboard pull-up resistors.
PXI-8433/4
4 Port, Isolated,
RS-485/RS-422, Serial Interface Module
The 4-port interface utilizes 10-position phone jacks, so each of the four connectors can exist on a single back panel. When purchasing a 4-port serial interface, the user can arrange links that change over the phone jacks to either DB-9 or DB-25 male connectors with standard pin assignments. In general, the user should arrange four converter links for each 4-port serial gadget. Note that a converter link is not intended to go the full distance from a 4-port serial interface specifically to the instruments. The most popular converter cables change over the 10-pin phone jack on a 4-port gadget to a similar DB-9 male connector, which can be found on a normal PC serial port. The association from this converter to the serial gadget uses the standard links utilized with the PC serial port.
PXI-6602
5 V, 8-Channel PXI Counter/Timer Module
performs encoder position measurement, event counting, period measurement, pulse-width measurement, pulse generation, pulse-train generation, and frequency measurement. It features eight counter/timers, digital debouncing filters, and TTL/CMOS-compatible digital I/O. The PCI-6602 can perform three simultaneous high-speed DMA transfers.
PXI-6233
16-Bit, 250 kS/s), 2 AO, 6 DI, 4 Sinking DO, Bank-Isolated, PXI Multifunction I/O Module
Features:
60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5 s
2 analog outputs, 16-bit resolution, up to 500 kS/s
2 counter/timers, 32-bit resolution, 80 MHz
NI-MCal calibration technology for increased measurement accuracy
6 digital inputs and 4 sinking digital outputs, 24 V
NI-DAQmx driver software and NI LabVIEW SignalExpress interactive data-logging software
PXI-6509
96-Channel, 5 V, TTL/CMOS, 24 mA PXI Digital I/O Module
can directly drive external digital devices such as solid-state relays (SSRs). You can configure each port for input or output, and no external power supply is required for outputs.
Using programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators. If a computer or application fault occurs, the PXI‑6509 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. Programmable input filters eliminate glitches/spikes and provide debouncing for digital switches/relays through a software-selectable digital filter.
National Test Equipment, Inc.
1935 Plaza Real Oceanside, CA 92056